1       10" CLAY POT

1       8" CLAY POT

1       6" CLAY POT

1       6" SAUCER

2       3/8" HEX NUTS

2       3/8" FENDER WASHERS

1       12" THREADED ROD

1       SOLAR LIGHT

  DOOR FOAM INSULATION

1       CAN OF EXTERIOR SPRAY SEALER

1.      All pots need to be painted inside and out with KIL TZ. This will keep your clay pots from absorbing moisture.

2. Top coat of paint can be white or your choice.

3. Detail paint your pots, as you wish.

4.      Place door foam striping on the inner rim of clay pot 2 and 3. This will cushion the pots and keep them from becoming wedged and, possibly cracking. 

5.Assemble your pots and place the threaded rod down through the holes of the pots and solar light. Place one fender washer and one hex nut on each end and tighten down.

6.       Seal your lighthouse with Exterior spray sealer.

7.      Place your lighthouse in un-diffused sunlight. Enjoy!